Why a 5K2K ultrawide needs an exact resolution check instead of a generic 4K or 8K label.
Evidence last checked 12 August 2026. Specifications assessed, not physically tested.
Manufacturer confirmed stated in a primary sourceInferred derived conservatively from published specificationsUnresolved the exact combination is not provedEvidence policy
Computer 1Mac
Computer 2Windows PC
Display5120×2160 5K2K
Refresh60Hz+
Preferred videoDisplayPort 1.4 / Thunderbolt
Main riskUnlisted 5K2K timing
The practical answer
No current catalogue product explicitly guarantees 5120×2160. A headline 8K capability does not prove this ultrawide timing. Use direct manufacturer confirmation for the exact monitor model, refresh, colour depth and Display Stream Compression (DSC) path before purchase.
Product assessments
These statuses apply to this exact configuration, not to the product in every possible setup.
Needs verification
TESmart DKS202-M24
● Published specifications do not prove the complete setup
What this means for you: The DisplayPort 1.4 and Display Stream Compression (DSC) bandwidth may be sufficient, but 5120×2160 is not explicitly stated on the current product page.
Computers
2
Displays
2
Video connections
DisplayPort 1.4
Published 4K ceiling
Single 240Hz · multi 144Hz
USB-C laptop charging
None
High dynamic range (HDR): supported · Variable refresh (VRR): supported · Keeps monitor settings (EDID): supported
Product-specific limits
Single 4K240 and dual 4K144 require Display Stream Compression (DSC); confirm the GPU, monitor, adapters and cables support the target mode.
The manufacturer lists 3440×1440 up to 144Hz and 5120×1440 up to 120Hz, so 3440×1440 at 165Hz is above the published limit.
Each display requires its own host-side DisplayPort signal.
It does not charge a USB-C laptop.
Evidence behind this assessment
7 recorded claims are manufacturer-confirmed, 1 are conservative inferences and 0 remain unresolved. Product evidence last checked 22 August 2026.
Sources last checked 12 August 2026. Products were not physically tested by KVMChecker. Firmware, host hardware, adapters and cables can change the result.