How to preserve 4K240 on a gaming PC while sharing a 4K OLED with a lower-bandwidth work laptop.
Computer 1Gaming PC
Computer 2Work laptop
Display1 × 4K OLED
Refresh240Hz on PC
Featureshigh dynamic range (HDR) + variable refresh rate (VRR)
Main riskDisplay Stream Compression (DSC) and asymmetric hosts
The practical answer
The HDK202-M24 is the only current catalogue product whose manufacturer explicitly states 4K240 via Display Stream Compression (DSC). Use one display output and leave the unused second monitor channel disconnected. The work laptop may run at 4K60 while the gaming PC uses 4K240.
Product assessments
These statuses apply to this exact configuration, not to the product in every possible setup.
Needs verification
TESmart HDK202-M24
● Published specifications do not prove the complete setup
What this means for you: The product page states 4K240 via Display Stream Compression (DSC) with variable refresh rate (VRR) and high dynamic range (HDR), but the exact GPU, OLED firmware, cable and colour mode must support it end to end.
Displays
2
Video connections
HDMI 2.1 / DisplayPort 1.4
Published 4K ceiling
Single 240Hz · multi 144Hz
USB-C laptop charging
None
High dynamic range (HDR): supported · Variable refresh (VRR): supported · Keeps monitor settings (EDID): supported
Product-specific limits
4K240 and dual 4K144 are Display Stream Compression (DSC) modes, so every device and cable in the signal chain must support the required mode.
A Mac needs a separate video output for each display.
Sources last checked 12 August 2026. Products were not physically tested by KVMChecker. Firmware, host hardware, adapters and cables can change the result.